Storm Damage Restoration in Merrimack County County, NH

24/7 Emergency Water Response

The first few hours decide how big the bill gets. Water climbs drywall, swells particleboard subfloor, and saturates carpet pad faster than most folks realize. Inside a day or two, a clean-water leak can become a mold problem. That is why the line is staffed around the clock and why emergency calls go straight to the contractor on duty closest to your road.

On an emergency visit, the crew that arrives typically starts with source control and safety. They verify the supply is off, kill any circuits sitting near water, and get extraction going with portable or truck-mounted equipment. For standing water in a basement or crawlspace, that may mean a submersible trash pump first. After that comes a moisture-meter survey, a thermal camera pass to trace migration, and the first air movers and LGR dehumidifiers.

By the end of the first visit, you should know a few things clearly. You should know which rooms are wet, what category of water is involved, and which materials can be dried in place versus removed. You should also know when the crew is coming back to take readings and move equipment. Three to five days of drying is typical, but hardwood floors, plaster walls, and stone foundations can stretch that out. Keep the machines on, the windows closed unless the pro says to open them, and the thermostat where it was set.

• Burst pipes, failed supply lines, and water heater leaks
• Storm water, roof leaks, and window well flooding
• Sump pump failures and basement seepage
• Overnight and holiday calls handled the same way

Water Damage in Homes and Farmhouses

Homes across Merrimack County come in every shape, and each one dries differently. A newer slab ranch near town acts nothing like an old farmhouse on a fieldstone or block foundation. Old stone and block walls hold moisture year-round, so the pro has to tell new water apart from long-standing dampness. A careful contractor takes baseline readings from unaffected areas before setting any dry standard.

Manufactured homes come with their own set of problems. Leaks under the bath or water heater tend to empty into the belly wrap, the underside barrier holding the insulation. Water can sit there for weeks, sagging the wrap and soaking the fiberglass, before anyone sees a stain. Pros who handle manufactured homes cut the wrap, drain it, remove soaked insulation, dry the decking, and reseal the barrier with belly tape.

Well and septic homes add one more wrinkle. A pressure tank leak, a broken well line, or a ruptured bladder can soak a basement or utility room without notice. Kill the breaker to the well pump first so it quits pushing water.

Older farmhouses deserve one more word of caution. Plaster over lath stays wet longer than drywall, but it is often worth saving since the old materials are hard to replace. Some pros drill small weep holes low on the wall, force dry air into the cavity, and keep the finish intact. Wide-plank floors get similar care, with drying mats and close monitoring instead of pulling them the first day. Before anything original comes out, ask the pro whether in-place drying will work.

• Slab, crawlspace, and basement homes
• Manufactured home belly wrap and subfloor drying
• Leaks from well pumps, pressure tanks, and supply lines

Businesses, Farms, Churches, and Schools

A small-town business cannot stay shut for a week. When a diner, hardware store, or small office floods, the contractor often stages the work so part of the space stays open while wet zones are contained. Plastic containment, negative air units, and evening equipment checks help keep business moving.

Churches and schools anchor county life, and they take on water more often than people expect. Kitchens in fellowship halls, old boiler rooms, and gymnasium floors are the usual suspects. Contractors in the network coordinate with trustees, volunteers, and school maintenance staff to work around services and class schedules.

On agricultural property, the calls are often for the farmhouse office, a shop with living quarters, or an equipment building with finished space. Expect the crew to bring a generator and extra hose if the outbuilding has limited power or water.

Commercial work also brings extra paperwork. Property managers, church boards, and school administrators often need a written scope, a drying plan, and daily moisture logs to share with insurers and decision makers. Contractors in the network who do commercial work are used to that and can usually provide certificates of insurance naming the building owner when requested. Ask about evening or weekend scheduling if daytime work will not fit.

• Retail, offices, diners, and main street storefronts
• Churches, parish halls, and parsonages
• Schools, community centers, and grange halls

Specialized Septic, Crawlspace, and Mold Jobs

Septic backups fall under Category 3, which means a completely different approach than a clean leak. The crew should arrive with respirators, gloves, Tyvek suits, and a plan to remove porous materials that the sewage touched. Carpet and pad usually go out, drywall is cut above the wet mark, and remaining surfaces are cleaned and treated before any drying begins. Keep pets and kids clear of the area until the job is complete.

Crawlspaces are the most common hidden problem in rural homes. A torn vapor barrier, a leaking drain line, or groundwater after storms can keep joists and sill plates damp for months. Pros pump standing water, remove wet insulation, set dehumidifiers below the floor, and test framing with a pin-type meter.

Mold found during tear-out is common in older homes. When that happens, a good contractor pauses, builds containment, and follows proper remediation steps instead of spraying and covering it.

Floodwater from creeks, drainage ditches, and low fields is also Category 3, even when it looks clear. It carries soil bacteria, fertilizer, fuel, and whatever else was sitting on the ground upstream. Expect the same precautions as a septic job, along with a look at the well if the wellhead went under. Many county health departments recommend testing and disinfecting a flooded well before anyone drinks from it again.

• Septic and sewer line backups
• Crawlspace water removal and drying
• Mold containment during demolition

Putting It Back Together, Permits Included

Drying is just the first half of the work. After the moisture readings hit the dry standard, someone has to hang drywall, replace flooring, set cabinets, and paint. Many contractors in the network handle reconstruction themselves, and others work with trusted local builders.

Rebuild work outside town limits usually goes through the county building department instead of a city office. Electrical, plumbing, or structural repairs may need a permit and an inspection, especially if a water heater, panel, or load-bearing wall is involved. Ask the contractor who will pull the permit and when the inspector needs to get in. Working with someone who knows the county process cuts out a lot of waiting.

Before any drywall goes back on, the pro should verify dry framing with a pin meter and write down the final readings. Covering damp studs is how mold appears a few months down the road. Ask to see that final reading and keep a copy with your insurance file. That record also helps if you sell later and a buyer asks about water history.

• Replacing drywall, trim, floors, and cabinets
• County permit and inspection coordination
• Photo and moisture records for the adjuster